Jenvey Heritage, the DCOE look-
Air filtration should always be used. Individual fine metal gauze filters can be used to complete your heritage installation.
An air temperature sensor allows the ECU to make trims to the fuelling and ignition timing based on the air temperature. This is supplied as standard in the package for optimum fuelling in all temperatures.
Built in-
“Road” specification is standard in the kit, with optional upgrades to “Race” specification and even bespoke designs, giving the perfect wiring harness for your engine bay. Learn more ►
Electronic fuel injection requires high pressure fuel be supplied to the injectors. You may already have suitable parts on your vehicle so these are not supplied as standard in the package. Parts available from Omex are; Learn more ►
Omex ECUs are chosen worldwide by vehicle manufacturers and by race championships.
High performing and with long-
A lambda sensor tells the ECU whether the engine is rich or lean, allowing the ECU
to make constant trims to the fuelling for best emissions. It is not required to
make the engine run, so if you do not need to pass emissions tests then you do not
need this part. However if you do need to, a standard engine with this package simply
needs the optional plug-
A barometric air pressure sensor can be added to allow the ECU to correct the fuel and ignition for air pressure changes. Required if the vehicle is used on trips to mountain ranges such as the Alps. As well as supplying the sensor, in this upgrade we also add the relevant section of the wiring harness for the sensor. The sensor supplied is a genuine OEM part for the best reliability.
With optional extra parts the Omex 600 ECU is capable of much more than simply running the engine; Learn more ►
An “ECU to PC“ communications cable (RS232 9pin “D” COM port) is always supplied. If you do not have the matching port on your PC an adapter to USB is available as an option;
All information provided is, to the best of Omex’s knowledge, correct at time of print. Due to differences in individual engines, differences in specification from original manufacturer that we may be unaware of, and differences in individual installations such as different exhaust designs, any claims of power or emissions cannot be guaranteed.
Prices can change without notice, E&OE. VAT@20%. Due to supplier variations and supply chain volatility, parts supplied may differ from the parts pictured but will always be of similar standard and performance.
All stated dimension are approximate.
CODE |
ITEM |
RETAIL |
INC VAT |
Base kit |
|||
EMTB00400 |
Ford Zetec Blacktop Engine Management and Heritage Throttle Body Package |
£2,965.00 |
£3,558.00 |
|
|
|
|
Air Filteration |
|||
X0400 |
Add air filters |
£204.00 |
£244.80 |
|
|
|
|
Throttle Linkage |
|||
X0510 |
Change to single cable throttle linkage under right hand |
£0.00 |
£0.00 |
X0520 |
Change to single cable throttle linkage under left hand |
£0.00 |
£0.00 |
|
|
|
|
Fuel Rail |
|||
X0600 |
Change to 8mm fittings |
£64.00 |
£76.80 |
|
|
|
|
High Pressure Fuel |
|||
X0700 |
Add JIC6 fitting fuel regulator |
£92.00 |
£110.40 |
X0710 |
Add 8mm fitting fuel regulator |
£88.00 |
£105.60 |
|
|
|
|
X0720 |
Add JIC6 fitting through fuel regulator (for single end fuel rail) |
£98.00 |
£117.60 |
X0730 |
Add 8mm fitting through fuel regulator (for single end fuel rail) |
£92.00 |
£110.40 |
|
|
|
|
Coolant Temperature Sensor |
|||
X0800 |
Change to push in coolant temperature sensor |
£0.00 |
£0.00 |
|
|
|
|
Wiring Harness |
|||
X0900 |
Change to race spec wiring harness |
£110.00 |
£132.00 |
X0910 |
Change to bespoke road spec wiring harness (price from) |
£150.00 |
£180.00 |
X0920 |
Change to bespoke race spec wiring harness (price from) |
£260.00 |
£312.00 |
|
|
|
|
Engine Management |
|||
OMEM002 |
Add USB adaptor |
£30.00 |
£36.00 |
|
|
|
|
Emissions |
|||
OMEM2301 |
Add lambda sensor |
£75.00 |
£90.00 |
|
|
|
|
Air Pressure / Altitude Correction |
|||
X1000 |
Add barometric pressure correction sensor and wiring |
£105.90 |
£127.08 |
|
|
|
|
Extra ECU Functions |
|||
OMEM6003 |
Add shift light |
£20.00 |
£24.00 |
OMEM6010 |
Add full throttle gearshift switch |
£10.00 |
£12.00 |
OMEM6011 |
Add launch control switch |
£15.00 |
£18.00 |
X1100 |
Add radiator fan control relay to wiring harness for 1 single speed fan |
£25.00 |
£30.00 |
X1110 |
Add radiator fan control relays to wiring loom for 1 twin speed fan or 2 single speed fans |
£50.00 |
£60.00 |
X1120 |
Add fuel pump control relay to wiring harness |
£25.00 |
£30.00 |
OMEM6020 |
Add tacho driver |
£30.00 |
£36.00 |
Does not fit your engine bay? Don't worry, we may be able to produce a bespoke package that will. Contact us with your requirements.
Do you have some particular requirements that are not met by the listed package options? We can almost certainly meet them. Contact us to discuss.
Are you a vehicle manufacturer and need a package bespoke to your chassis? We have experience supplying everything from niche vehicle manufacturers making a few vehicles a year up to worldwide homologated vehicle manufacturers making hundreds of vehicles per year. Contact us to discuss your requirements.
The throttle linkage translates the movement of your throttle pedal to the opening of the throttles. Correct geometry and smooth bearing surfaces are critical for good throttle "feel". Just as important though is good cable routing.
A single cable linkage positioned above the left hand body is fitted as standard to the package, but other positions to allow optimum cable routing are available. All linkages are supplied with throttle cables.
The fuel rail is fitted with JIC6 hose ends. We can swap these to fittings suitable
8mm push-
If you are ready to make a purchase or have any questions please contact us.
A coolant temperature sensor is required to allow the ECU to adjust the fuelling
during warm-
This package use 45mm bore throttle bodies and 340cc injectors supporting a maximum of approximately 250bhp. If you believe you are going to make more power than this contact us for a bespoke package.